Elongation≥600 percent YAXING item volatile zero point seven five percent suitable for flexible industrial uses and consistent output

Product Description:

The CPE 135A is a high-performance chlorinated polyethylene (CPE) product designed to meet the rigorous demands of various industrial applications. Known for its excellent balance of mechanical properties and chemical resistance, CPE 135A stands out as a reliable and versatile material in the field of elastomers. This product is engineered to provide superior durability and flexibility, making it suitable for use in automotive components, wire and cable insulation, roofing membranes, and other applications requiring robust performance under challenging conditions.

One of the defining characteristics of CPE 135A is its low Heat of Fusion, which is measured at ≤ 2.0 J/g. This low heat of fusion indicates that CPE 135A has minimal crystalline content, contributing to its excellent flexibility and impact resistance. The reduced crystallinity also enhances the product’s ability to maintain its mechanical properties over a wide range of temperatures, which is critical for applications exposed to varying environmental conditions.

Density is another key attribute where CPE 135A excels, with a density of 1.35 g/cm³. This density level provides a good balance between lightweight properties and strength, allowing manufacturers to produce components that are both sturdy and manageable in terms of weight. The density of CPE 135A supports its use in applications where weight reduction is important without compromising on the material’s structural integrity.

In terms of hardness, CPE 135A exhibits a Shore A hardness of ≤ 64%. This moderate hardness level ensures that the material remains flexible enough for dynamic applications while still providing sufficient resistance to deformation and abrasion. The Shore A hardness rating of CPE 135A makes it an ideal choice for products that require a resilient yet pliable material, such as seals, gaskets, and flexible hoses.

The tensile strength of CPE 135A is another significant attribute, with a value of ≥ 6.0 MPa. This tensile strength highlights the material’s ability to withstand considerable stress and strain without failure, which is essential for applications subjected to mechanical loads and stretching. The robust tensile strength of CPE 135A ensures long-lasting performance and reliability, reducing the need for frequent replacements and maintenance.

Moreover, CPE 135A boasts a Mooney viscosity of ≤ 96 ML (1+4) at 125℃. Mooney viscosity is a critical parameter that indicates the processability of the elastomer. The relatively low Mooney viscosity of CPE 135A facilitates easier processing during compounding, molding, and extrusion, leading to efficient manufacturing cycles and high-quality finished products. This attribute makes CPE 135A a preferred choice for processors seeking materials that combine excellent performance with manufacturing efficiency.

Overall, CPE 135A is a well-rounded chlorinated polyethylene product that delivers a combination of low heat of fusion, optimal density, balanced hardness, high tensile strength, and favorable processability. These properties make CPE 135A an excellent material solution for industries requiring durable, flexible, and chemically resistant elastomers. Whether used in automotive parts, construction materials, or electrical insulation, CPE 135A provides consistent quality and performance that meet the demands of modern engineering applications.

In summary, CPE 135A represents a high-quality CPE option that stands out in its category. Its carefully engineered properties such as a heat of fusion ≤ 2.0 J/g, density of 1.35 g/cm³, Shore hardness (A) ≤ 64%, tensile strength ≥ 6.0 MPa, and Mooney viscosity ≤ 96 ML (1+4) at 125℃ make it a dependable choice for manufacturers and developers looking for reliable elastomeric materials. The versatility and performance of CPE 135A continue to support its widespread use across multiple industries, proving it to be a valuable material in the portfolio of CPE products.

Features:

• Product Name: CPE 135A
• Material: Chlorinated Polyethylene (CPE)
• Elongation: ≥600%
• Shore Hardness (A): ≤64%
• Density: 1.35 G/cm³
• Tensile Strength: ≥6.0 MPa
• Volatile Content: 0.75%
• High durability and flexibility typical of CPE materials

Technical Parameters:

Applications:

The RUNYE 135A Chlorinated Polyethylene (CPE) is a versatile material widely used in various industrial applications due to its exceptional physical and chemical properties. Originating from China, this high-quality product boasts a density of 1.35 G/cm3 and a chlorine content of 35±1%, making it an ideal choice for enhancing the performance of PVC IMPACT MODIFIER formulations. Its unique combination of attributes allows it to be effectively utilized in numerous application occasions and scenarios.

One of the primary applications of RUNYE 135A Chlorinated Polyethylene is in the modification of PVC materials. Thanks to its excellent elongation of ≥600% and low heat of fusion (≤ 2.0J/g), it significantly improves the flexibility, toughness, and impact resistance of PVC products. This makes it highly suitable for manufacturing flexible PVC cables, wire insulation, and various types of films that require enhanced durability and elasticity. The product’s Mooney viscosity of ≤96ML(1+4) 125℃ ensures good processability, making it easier to blend with PVC resins in industrial settings.

In the automotive industry, RUNYE 135A is commonly used as a PVC IMPACT MODIFIER to increase the resilience and weather resistance of interior and exterior parts. Its ability to maintain performance under harsh environmental conditions, including exposure to heat and chemicals, makes it a preferred choice for bumpers, door panels, and sealing profiles. Additionally, the excellent elongation and chlorine content contribute to improved impact strength, reducing the risk of cracking or damage during vehicle operation.

RUNYE 135A Chlorinated Polyethylene is also employed in the production of hoses, seals, and gaskets that require flexibility and resistance to oils, chemicals, and temperature variations. Its high elongation property ensures these components can withstand stretching and mechanical stress without failure. Furthermore, the material’s compatibility with other polymers allows for the creation of composite materials tailored to specific performance requirements.

In summary, the RUNYE 135A Chlorinated Polyethylene is an indispensable material for industries seeking to enhance the mechanical and chemical properties of PVC through effective PVC IMPACT MODIFIER applications. Its superior elongation, balanced chlorine content, and optimal viscosity make it suitable for a wide range of products, including flexible cables, automotive parts, hoses, seals, and more, ensuring reliability and longevity in demanding environments.